What is the main danger of anchoring a fishing boat from the stern

0

Anchoring the boat is very important, especially when entering open water. However, it is risky to make a mistake as the result can be dangerous, so experimenting with the process is not recommended. But what if you try to anchor from the stern of the boat?

In this article, we are going to cover what the main danger of anchoring a fishing boat from the stern is. We will talk about the details relating to this, including how such an anchoring method can affect the boat. Stick around for more.

Anchor from the stern

mooring-by-the-stern

The stern is not the right place to attach the anchor. This will leave the boat vulnerable to flooding or other types of damage. What would happen if you anchored a boat from the stern exactly?

If the mooring line is connected to the stern of the boat, the stern will end up positioned against the water current and the wind. While the bow is designed to cut through wind and water, the stern will create drag, which is not good for the boat.

With the water current against the stern, water can seep into the hull of the boat, leading to flooding. If the flooding gets worse and gets out of control, the boat may end up sinking.

The integrity of the boat’s hull can also be compromised due to the added pressure exerted on the boat. Even if the boat holds up through the stern anchoring process, the damage may already have been done, for example if cracks have been made in the material of the boat.

The cost of appraising and possibly even repairing the boat makes it difficult to justify such an experience.

The engine can also be affected by wind and water currents. The propeller and rudder can be subjected to an external force that they are not designed to withstand, which will affect the performance of the boat.

Tips for anchoring the boat

what-would-happen-if-you-anchor-a-boat-from-the-stern

To better understand how stern anchoring can affect the boat, let’s look at the proper way to anchor the boat.

To properly deploy the anchor, it is necessary to have a sufficiently long cavalry or anchor line. To determine the correct length of ride, we need to know the depth of the water. The line should be at least seven times the depth of the water.

Next, we need to deploy the anchor to a suitable place where the anchor can be fixed. This means that the ground must allow the anchor to sink into it, which will then hold the anchor in place to support the boat.

Water depth and soil characteristics can be researched in advance or determined using instruments on board if you have them. Knowing the characteristics of the water and the ground is important, which is why it is necessary to have some familiarity with the area where you intend to anchor.

1. Anchor deployment

Once the boat is carried by water or wind far enough, the anchor will sink into the ground. Having a long line will allow the anchor to be placed at a suitable angle, but if the angle is not enough, the anchor will be pulled out easily.

The bow is the right place to attach the anchor line. When the boat is anchored in this way, the boat will end up positioned with the bow pointing in the direction of the anchor and against the wind and current.

2. Anchor Reset

There are times when the anchor is not able to set properly. When this happens, the boat is not secured in place because the anchor drags on the ground. In this type of situation, resetting the anchor is necessary to allow the anchor to be installed correctly.

There are different methods to determine whether or not the anchor is dragging and not setting properly. However, this is to determine if the boat is moving too much. The easiest way is to use on-board electronics like a GPS to determine if the boat is moving.

Another method to determine the movement of the boat is to place two fixed landmarks on the horizon. By determining the distance from the boat to the two landmarks, we can tell if the boat has moved. However, this method is dependent on the knowledge and skill of the person observing the landmarks, so using a tool such as a GPS is recommended.

3. Anchor recovery

To retrieve the anchor, the boat must be positioned directly above the anchor. When the boat is thus positioned, it will be easy to recover even if it may have sunk into the ground.

Conclusion

You now have a good idea of ​​what happens when you try to anchor the boat at the stern. It’s a dangerous thing to do, so hopefully knowing about these risks will keep you from trying it and keep you out of trouble.

If you know of anyone else who wonders what the main danger of anchoring a fishing boat from the stern is, please share that with them as well. Also, please leave your comments and suggestions below.

Remember to navigate safely.

Share.

Comments are closed.